Home > Powersports > STREET > Kawasaki Accessories >

2003-2006 Kawasaki ZX-6RR Ninja Procom PowerJet 009

2003-2006 Kawasaki ZX-6RR Ninja Procom PowerJet 009
2003-2006 Kawasaki ZX-6RR Ninja Procom PowerJet 009

List Price: $129.00
Our Price: $119.95
You save $9.05!

Availability:: Usually Ships in 24 Hours - on all items (except made to order)
Product Code: 344434 E


- SKU:

Most fuel injected engines run very lean and this is fine except for when demanding maximum power output on the track, especially when you have sport exhausts installed. Being able to simply adjust the fuel/air ratio in those conditions would be wonderful wouldn't it?

The PowerJet Fuel Controller allows just that! You can adjust the fuel map from -4% to +10% by selecting one of the 10 settings. We even incorporated a stock setting which means no change compared to stock.

Procom PowerJet is a simple yet complicated device. It measures the outside air temperature very close to where the stock sensor is located, and adjusts the signal from the OEM air temperature sensor to the ECU to make use of the built in Air Temperature Correction factor that is built into every stock ECU.

What this accomplishes is that the ECU is told that the intake air is a little cooler than it is, and the ECU will respond by injecting a fraction more fuel depending on the PowerJet setting. You as a rider will notice a substantially improved engine response when you twist the throttle.

The neat thing is that when under constant load (constant speed) the oxygen sensor in the exhaust will make the ECU correct the fuel/air ratio back to stock! However, as soon as the system notices an increase in power it switches from closed loop (oxygen sensor feedback) back to open loop (no feedback) and will correct the fuel/air ratio by the amount you selected on the PowerJet.

PowerJet can be easily installed by plugging it in between the stock AIT sensor which is usually located somewhere on the airbox and the bike's wiring harness. Each PowerJet comes with the exact plug in connectors and installation will normally only take a few minutes. Finding the air temperature sensor usually takes more time than plugging in the PowerJet.

You can leave the PowerJet sitting under the bodywork somewhere as it is designed to be rugged and waterproof. After figuring out what setting works best with your specific engine/exhaust/intake combination you typically would leave it alone.


Suzuki ATV's

2007 Suzuki LT-A700X King Quad 4x4 
2007-2011 Suzuki LT-A750X King Quad 750AXi 
Yamaha ATV's

2006-2012 Yamaha YFZ700 Raptor 700 R / SE 
Kawasaki Street Bike's

2003-2008 Kawasaki ZX-6R Ninja 
2003-2006 Kawasaki ZX-6RR Ninja 
2005-2006 Kawasaki Z750S
2003-2008 Kawasaki Z1000 
2010-2012 Kawasaki Z1000 
2004-2007 Kawasaki ZX-10R Ninja
2006-2012 Kawasaki ZX-14 Ninja 
2008-2009 Kawasaki ZG1400 Concours 14 
2004 Kawasaki Vulcan 2000 
2005-2010 Kawasaki Vulcan 2000 Limited / Classic / LT 
Suzuki Street Bike's

2006-2007 Suzuki GSX-R600
2006-2007 Suzuki GSX-R750 
2008-2009 Suzuki GSX1300 B-KING
2008-2009 Suzuki VLR1800 C109R Boulevard 
2006-2011 Suzuki VZR1800 / M109R Boulevard 

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Powersports > STREET > Kawasaki Accessories
Powersports > STREET